Man down alarm: Fall detection for incapacitated lone workers
A man down alarm is a type of alert that activates when a worker falls or becomes motionless and does not rise within a set time. The concept is central to lone worker safety, especially in New Zealand where wearable lone worker alarms provide SOS, GPS location, fall detection, man-down alerts and two-way voice without mandatory monitoring fees. The man down alarm depends on sensors that detect impact, orientation, or lack of movement, and it differs from a manual panic button because it triggers automatically when the device wearer cannot press a button. The alarm then sends a notification to a response centre or a designated contact, enabling a rapid check on the worker’s condition.
Fall detection technology in these devices has evolved from simple tilt switches to multi-axis accelerometers and gyroscopes that can distinguish a genuine fall from a sudden bend or a dropped device. The core function remains the same: to identify when a person has fallen and is not getting up. This is especially important for workers in remote or isolated roles, such as farm inspectors, forestry crews, maintenance technicians, and security guards who patrol alone at night. Without automatic detection, an incapacitating fall might go unnoticed for hours or days.
How the alarm detects a fall
A man down alarm typically uses a combination of an impact sensor and a no-motion timer. The impact sensor registers the force of a sudden stop, while the no-motion timer begins counting once the device detects that the wearer has stopped moving. If the wearer does not reset the timer by moving or pressing a cancel button within a preset period, the device escalates to a full alert. This two-stage process helps reduce false alarms from momentary stops or jostling.
Modern units also incorporate orientation detection. If the device is worn on a belt or a harness and the wearer falls and stays horizontal, the sensor can detect that the unit is no longer upright. Some systems combine this with a short delay before triggering, allowing the wearer to rise or cancel the alert if they are not injured. The delay is adjustable in many models, typically ranging from a few seconds to a minute, depending on the work environment and the employer’s risk assessment.

Kinds of fall detection systems
Standalone wearable alarms are the most common form of man down alarm for lone workers. These are small battery-powered devices that clip onto a belt, pocket, or hard hat. They communicate via cellular networks, satellite, or radio to a monitoring service or directly to a supervisor’s phone. Some models are integrated into a two-way radio or a smartphone app, using the phone’s accelerometer and GPS to detect falls and send location data.
Another kind is the area-based system, which uses fixed sensors in a room or a corridor to detect a person who has fallen and is not moving. These are often found in hospitals, prisons, or elderly care homes, but they are less common for outdoor lone workers because the worker moves out of range. For workers who travel across open ground, wearable units that combine fall detection with GPS location are the standard choice.
A third category is the vehicle-mounted man down alarm. Some heavy machinery and fleet vehicles include a sensor that detects if the driver slumps forward or stops moving. If the driver does not respond to a prompt, the system sends an alert. This is used in long-haul trucking, mining, and agricultural operations where a sudden health event could leave a driver incapacitated behind the wheel.
Alert delay and false alarm management
Every man down alarm must balance quick detection against the risk of false alarms. A system that triggers too easily can overwhelm responders and cause workers to ignore alerts. Most devices therefore allow an adjustable alert delay. The delay gives the worker time to cancel the alarm if they are simply adjusting their position or have taken a short rest. The trade-off is that a longer delay may mean a delayed response for a genuinely incapacitated worker. Employers typically set the delay based on the nature of the task and the worker’s typical movement patterns.
False alarms can also be reduced by using multiple sensor inputs. For example, a unit that requires both a significant impact and a lack of subsequent movement before triggering will produce fewer false alerts than one that responds to any sudden tilt. Some devices also learn the wearer’s normal motion patterns over a few days and adjust sensitivity accordingly. This adaptive approach helps filter out motions that are part of the job, such as bending to pick up a tool or kneeling to inspect equipment.
When a false alarm does occur, the worker simply presses a button to cancel it. The alarm does not escalate to a response centre unless the cancellation is missed. In the case of a genuine fall where the worker is conscious and able to move, they can cancel the alarm themselves. If they are unconscious or unable to move, the alarm proceeds to notify the designated contact or monitoring service.

Emergency response and location data
Once a man down alarm is activated, the device sends the wearer’s GPS coordinates along with the alert. This allows responders to go directly to the worker without needing to search a large area. Some systems also provide two-way voice communication, so the responder can speak to the worker through the device’s speaker and microphone, assess their condition, and give instructions until help arrives. This feature is especially valuable when the worker is in a remote location or when the cause of the fall is unclear.
The response can be handled by an in-house safety team, a contracted monitoring centre, or a pre-designated colleague. In New Zealand, many employers use a monitoring service that operates 24 hours a day and can dispatch emergency services if needed. The key is that the alert reaches someone who can act, not just a recording or an email that might be checked later.
Wearable alerts after a workplace fall
Wearable alerts after a workplace fall are not limited to the initial impact. Some systems can also detect when a worker has not moved for an extended period, even if no fall was registered. This "no motion" alarm covers situations where a worker becomes incapacitated slowly, such as from a medical event like a stroke or exposure to fumes. The device monitors for any movement over a set window, often several minutes, and triggers an alert if none is detected. This feature complements the fall detection sensor and provides an additional layer of protection for workers who may be unable to signal for help.
Wearable alerts after a workplace fall are also used in conjunction with other safety measures, such as check-in timers and lone worker protocols. A worker who is expected to check in every hour and fails to do so can be located and assisted, even if no fall was detected. The combination of fall detection, no-motion monitoring, and manual check-ins creates a comprehensive safety net for people who work alone or in hazardous environments.
Limitations and considerations
No fall detection system is perfect. A device worn on the belt may not detect a fall if the worker lands on their back and the sensor is oriented away from the impact. Similarly, a unit worn on a hard hat might not detect a fall if the hat comes off. Proper placement and wearing the device according to the manufacturer’s instructions are important for reliable operation. Battery life is another factor; the device must be charged or have its batteries replaced regularly to ensure it works when needed.
Environmental conditions can also affect performance. Extreme cold can reduce battery life, and heavy rain or mud may block a device’s microphone or speaker. Workers in very dusty or wet environments may need a ruggedised unit with an IP rating suitable for their conditions. Employers should test the system in the actual work environment to confirm that the fall detection settings are appropriate and that the device’s communication network has coverage in the areas where the worker will be.

Regulatory context
In New Zealand, the Health and Safety at Work Act requires employers to manage risks to lone workers. While the law does not prescribe a specific device, it does require that workers have a reliable means of raising an alarm and that the employer monitors their safety. A man down alarm is one tool that helps meet this duty. The decision to use a particular system depends on the risk assessment for each task, the worker’s location, and the communication infrastructure available.
Some industries have additional guidelines. For example, the forestry sector often requires workers to carry a personal locator beacon or a satellite communicator with fall detection. The agricultural sector uses similar devices for workers in remote paddocks or during stock handling. For construction workers on tall structures, a fall detection device that also triggers a site-wide alarm may be used. In each case, the device must be chosen to match the specific hazards of the job.